Home > Interactive E-Catalogue

Interactive E-Catalogue

CHOOSE CONNECTOR RANGE

RANGE MS (threaded coupling connectors)

RANGE MG (reverse bayonet coupling connectors)

RANGE MGR (same as MG but with wave spring and flat washer in plug, stainless steel wear pins on receptacle)

Choose Shell Style

MS Shell Style

MS 3100
WALL MOUNTING RECEPTACLE
MS 3100 wall mounting receptacles are used to carry wires through walls or bulkheads or to provide a means of disconnection at a Bulkhead. MS 3100 receptacles mate with 3106 and 3108 style cable mount connectors.

MS 3101
IN-LINE RECEPTACLE
MS 3101 cable connectors are used for cable extension requirements, where mounting provisions are unnecessary. MS 3101 connectors mate with 3106 and 3108 style cable mount connectors.

MS 3102
BOX MOUNTING RECEPTACLE
MS 3102 box mounting receptacles are used in junction boxes or as an integral part of equipment. These connectors mate with 3106 and 3108 styles cable mount connectors.

MS 3106
STRAIGHT CABLE CONNECTOR
MS 3106 straight cable connectors mate with 3100, 3101 and 3102 styles. MS 3106 has an 'O' ring under the coupling nut, thus effecting a seal.

MS 3107
JAM-NUT RECEPTACLE
MS 3107 is a rear-mounted receptacle which does not require any mounting holes and screws for mounting. Only a single hole for entry of the receptacle body is required on the equipment. These come with or without rear threads, and mate with the 3106 and 3108 cable mount connectors.

MS 3108
90° ANGLE CONNECTOR
MS 3108 90° cable connectors are used where there is limited space and where wires must be brought at abrupt angles. This connector mates with 3100, 3101 and 3102 styles. MS 3108 has an "O" ring under the coupling nut which provides a sealing.

Choose Shell Style

MG/MGR Shell Style

MG 00
WALL MOUNTING RECEPTACLE
MG 00 wall mounting receptacles are used to carry wires through walls or bulkheads or to provide a means of disconnection at a Bulkhead. MG 00 receptacles mate with MG 06 and MG 08 style cable mount connectors.

MG 01
IN-LINE RECEPTACLE
MG 01 cable connectors are used for cable extension requirements, where mounting provisions are unnecessary. MG 01 connectors mate with MG 06 and MG 08 style cable mount connectors.

MG 02
BOX MOUNTING RECEPTACLE
MG 02 box mounting receptacles are used in junction boxes or as an integral part of equipment. These connectors mate with MG 06 and MG 08 styles cable mount connectors.

MG 06
STRAIGHT CABLE CONNECTOR
MG 06 straig ht cable connectors mate with MG 00, MG 01 and MG 02 styles. MG 06 has an 'O' ring under the coupling nut, thus effecting a seal.

MG 07
JAM-NUT RECEPTACLE
MG 07 is a rear - mounted receptacle which does not require any mounting holes and screws for mounting. Only a single hole for entry of the receptacle body is required on the equipment. These come with or without rear threads, and mate with the MG 06 and MG 08 cable mount connectors.

MG 08
90° ANGLE CONNECTOR
MG 08 90° cable connectors are used where there is limited space and where wires must be brought at abrupt angles. This connector mate s with MG 00, MG 01 and MG 02 styles. MG 08 has an "O" ring under the coupling nut which provides a sealing.